Recent content by OlFerguson

It has a cab. Generally it’s parked in a Quonset with no heat . Gets Down to -30 or -40 in the winters

Breather ??

The 3 filters were changed with Kubota filters. The suction 0 rings were also replaced . This was the 3P hitch pump

Yes SUDT2 with Kubota filters

So I’m not too sure where to start here. I have had issues in the past with contaminated fluid , usually water . My tractor (m100x) is kept inside when it’s not being used . I changed the hydraulic pump on it as well as changing my filters and I changed my hydraulic oil 2x to ensure there was no...

m46. It’s a cable run alo /quicke. The direct replacement is the same one Massey and new holland uses on their machine . It’s open lcs. Ergo drive .

The 3 point hitch goes up and down no issues . The loader valve is having some issues. I’m likely going to replace it but looking to test a few things before buying it. It’s definitely getting pressure .

What’s the best method for testing a hydraulic regulator on a m100/m135gx. Thanks .

Just wondering who has purchased a 0 turn mower from Kubota gas or diesel . What do you like or don’t like about it. I know every machine has their issues , just want a general idea of how you like your machine . Deere wants me to buy a machine and I told them I’ve got options before spring . Thanks

I would do some basic pressure testing before tearing into it. From my experience with these you generally can work around driveability issues with leaving the unit in tact without disassembling everything.

yeah I have a m46 loader on it made by Alo (quicke) . I know with Kubota they seem to make different machines for different countries but im in Canada . Looking at the diagrams its an open centre, which I’m going to assume changes the way you test things.

This tractor is a m100x

Anyone have any tips and tricks for testing the relief valve on the kubota tractor with open LCS. Thanks for your time.

Any wear on the swash plate

Different countries use different setups. I’m in Canada and I have a Quicke/Alo loader. Some parts are available through Kubota , others are sourced through different dealerships, for example internal hydraulic parts. It’s a pain.