Recent content by northern hunter

Just remember that biodiesel has less BTU's ! So higher the percent bio in your fuel the less power you will have! But about 5% will help to lube the fuel system to make up for the loss of sulfur they take out. If you have not run any amount bio yet get a couple extra fuel filters! Bio will...

Didnt know if there was a good place to get them !

You have the wrong size ! You should at least have 3-4 inches extra and no more then 7-8 inches ! Thats how how I do it on a semi.

Have you ever thought about using a broadcast spreader and using pellatized lime instead ! We have been using one for years. I know that pouderd lime works faster. But not by much wouldnt go back to powder lime again to much of a mess. I pay about $45 a ton for the pellatized lime bagged for me.

Got to think'n about it would have to be the pump ! A injector would be causing problems right from start up !

Have your fuel pump tested to!

Ok I get what you did !

lahoyer Do you have any pics of how you did it?

Need 6-12 and 8-16 ! Where do you get them and how much? Dont care if new or used !

Your have fuel delivery issues either in the pump or injectors ! As you bring on the fuel its metering alright but then something is not holding back fuel as rpms are held. I would have to say its a injecters!

Thanks vic ! I should be fine as long as I leave the system open right?

Vic doesnt show you how to tap into the junction block. Thats why I asked you folks for help. This forum is the best ! Learned so much in the last few weeks !

Thank you That what I wanted to know ! Now I know how to set up!

What is the purpose of this ? Can you tap into this for hydraulic attachments ?

Heres a pic of what I am talking about!