Recent content by Nicfin36

Yeah, I'm sure there are much more secure methods. The bungee mod is about a 10 minute job drilling the holes in the levers.

One of you fellows here gave me the idea of drilling a hole in each SSQA lever and using a bungee to hold the levers down. You can get it really tight with a bungee. Of course, a grill guard is a a good idea too, even without the grapple.

I have a landscape rake and recently tried to use it to rake up cut grass in my field before tilling. It did a very poor job on raking up the grass. Like Fordtech suggested, I felt like a pine needle rake would have done a better job, but don't know for sure. I just wouldn't recommend a...

Put mine in the cup holder.

I won't disagree with you on that, and will say I tried to do the very same thing before I bought the L2501. Here, you couldn't find used machines. I would have loved something like a 40 series. I am sure there were some out there when I was shopping, but I looked diligently and finally gave up...

I can't speak to the elevation affecting your tractor. I'm at 555 feet here. I will say from my experience, you're not going to do anything fast on a L2501, or L2502 in this case. I did not want the DPF and wanted just a simple tractor and settled for the L2501 over the L3901. It wasn't really...

Or grease nipple if you're feeling frisky. :ROFLMAO:

Many people make those from those plastic totes that have the metal cages around them. They cut open one side and configure it much like the one you have pictured. I have been meaning to get one to do that.

I remember someone here modded their seat so it would sit further back. I remember, because I thought I might have to do the same thing, but I have had no issues with room on my BH77. And offroad diesel, besides no tax, also has dye in it. Red dye is all I have ever seen. It is so "they" can...

This probably won't help you, but this is where the zerk is on my gearbox. It is on the opposite side of the deck discharge chute.

It sounds like everyone has just about said what needs to be said. :ROFLMAO:

Looks great!

It sounds like everyone has said what needs to be said. My zero turn deck is similar. I have a zerk for my gear box. Your gear box also holds oil and should be checked. I can use UDT or 10W30 in my gear box. The holes on the spindles under the deck are a grease weep hole. You are supposed to...

Yes. What has happened so far is I was given a refund. The lady of the merchant that contacted me via eBay instructed me to leave the tank in the box outside so the carrier, which was UPS, could inspect it. This is the message: "Thank you. We will contact the carrier to process your claim...

$900 is a great price if in good shape.