Recent content by Mr Winichester

  1. M

    Can any BX 23S owners verify that a King Kutter BB-48 box blade fits the hitch mount

    Thanks, Which model did you get from everything atachments. I see they have 3 types they make, I like the yellow heavy duty, slightly hevier model.
  2. M

    Can any BX 23S owners verify that a King Kutter BB-48 box blade fits the hitch mount

    I am looking for a box blade for my 2017 kubota bx-23s, I am still a little confused about the 3 point hitch, its a category 1, but does it have category 1 or category 0 spacing? So will any implement that is listed as cat. 1 fit the mount? Does any one have a king kutter bb-48 on this model...
  3. M

    How not to abuse your HST? Bx23S

    Thanks everyone for that info. So I think that what I learned here that I was unaware of is that the "go pedal" is not really like an accelerator pedal but really like a gearshift pedal. "The pedal acts as an infinitely variable speed transmission with it's greatest force at the minimum...
  4. M

    How not to abuse your HST? Bx23S

    So I am new to tractors, just got a bx23s. auto trans, and 4WD. I am wondering about what type of use or should I say improper use may damage or put a lot of wear on the transmission, especially when using the front bucket and pushing into piles, and actions like that where you are pushing up...
  5. M

    Back dragging ? with front wheels in air on BX23S

    Thanks Bill, So it sounds like the hydraulic cylinder that controls the bucket curl can withstand force in the opposite direction. for example if you just lift the front wheels off the ground in a stooped position? I think in that case you have all the weight of the front of the tractor on...
  6. M

    Back dragging ? with front wheels in air on BX23S

    Thanks for those replies, I googled back dragging and I thought I saw some posts on how this technique puts revers force on the FEL hydraulics and there was a problem maybe with bending cylinders and or putting to much revers presure on the system. So I just want to get opinions on this type...
  7. M

    Back dragging ? with front wheels in air on BX23S

    If you keep the front bucket at an angle of no greater that 45 degrees. Is it OK to lift the front wheels off the ground with the loader arms and back drag if you want to put more pressure on the ground. Or will this possibly damage your hydraulics? Thanks
  8. M

    How many ignition keys did you get with your new Kubota?

    Ray, why do you say I would need to ask for the second key? What are dealers keeping every ones secon key? Thanks
  9. M

    How many ignition keys did you get with your new Kubota?

    I just picked up my new BX23S form the dealer and it had only one key with it. How many keys does Kubota provide with its new tractors? Thanks
  10. M

    Can some one with a 2017 BX23S confirm the front bucket inner dimension

    Thanks for those replies guys, let you know how it works out.
  11. M

    Can some one with a 2017 BX23S confirm the front bucket inner dimension

    Thanks Ron, maybe you can ,shoot me a measurment at some point.
  12. M

    Can some one with a 2017 BX23S confirm the front bucket inner dimension

    Ok so no 2017 BX 23S owners out there reading this forum????
  13. M

    Can some one with a 2017 BX23S confirm the front bucket inner dimension

    Thanks, imnukensc Just wanted to confirm with some actual owners of the new bucket style, maybe some out there?
  14. M

    Can some one with a 2017 BX23S confirm the front bucket inner dimension

    Thanks JMF. I dont know if the pin on i different from the new two lever quick attach. So I would like to get some measurements of the two lever quick attack type.