Recent content by kubotaguy

https://www.messicks.com/wiki/Kubota/L3540.aspx http://www.colemanequip.com/Kubota-L3540-4WD-Hydrostat-Cab-Grand-L-Tractors-Parts/

your profile says Windsor.... I assume ontario, canada. try a parker store CHECKER INDUSTRIAL LTD 3345 WYANDOTTE STREET EAST WINDSOR ON N9A 1E9 CANADA Telephone:(519) 258-2022

my guess would be clutch problem and perhaps water got into the clutch housing and the clutch is frozen or sticking preventing it from engaging. my kubota manual tells under the service as required section to check for water by pushing on split pin and if water is present to remove the plug and...

i've got an older blade only 72 inches. i repainted it so had to take that bolt out. the original bolt was "seized" to the welded on nut and took it to dealer when 10 minutes of 1 inch drive impact wrench finally loosened it. I bought new 1" by 7" bolt for $21 plus tax and re-assembled with...

great idea... i do something similar with my 62 inch belly mower in winter time. the belly mower and the 4 foot wide snow blower trade places in the summer.

2 summers ago my neighbor two miles down the road had his relatively new compact utility tractor stolen (it was green....but that is different story). in the same time frame another neighbor (a retired illinois state trooper) had a handgun, a computer, some of his wife's jewelry, and his retiree...

i know the feeling Wolfman. I am on our local volunteer fire dept and get called to lots of rescues. We cover 18 miles of the interstate highway. it is sad to come to a rescue scene where someone doesn't survive. we also cover a large state park where we get calls for down horse riders...

how about using used UDT2 in chainsaw as bar oil?

used my L4400 with FEL to clear snow from my driveway and since i had it warmed up I put it into heated garage bay and changed the oil and oil filter and fuel filter too

as you get your driveway established you might wish to consider getting a land plane to keep it maintained and level. a level driveway will be easier to remove snow from. i used a blade for years and the problem is that the blade follows every little contour so eventually you end up with a...

super udt2 it's a little bit more pricey... but you won't ever regret using it. i have read too many horror stories when guys tried to save a few bucks and stopped using super udt2 and then switch back to solve problems. HST transmission get hard use. the shear strength characteristics...

I have a kubota L4400 HST. the headlights are anemic (I do have some northern tool LED work lights mounted on my ROPs that help immensely) and i would like to replace the original headlight bulbs with an LED of some sort. The OEM part number for the bulb is 34070-99010. Has anyone been down...

29 hp should easily handle a 6 foot blade. i used to have a 32 hp green tractor with turf tires and it handled a 6 foot blade and did not have traction problems with just the blade but I did have six 60 pound wheel weights. i bought a spray can of teflon lubricant for $4 or $5 and every time...

my initial design also had a 2nd shortcoming. I originally put about 400 pounds of sand and 9 of the elevator weights into the ballast box. With the weight of the ballast box, sand, and elevator weights, I was at approx 1500 pounds of ballast. Twas a bit too much weight. I sprung the...

the "design" wasn't without some shortcomings. on the first pass with the components that hook up to the quick hitch, when I put about 200 pounds of sand and some steel weights in the box, I could not get the quick hitch low enough to allow it to be hooked up. :-( I have a friend who is...