Hkb82

Hkb82

Well-known member 43 From Ontario Canada
Messages
418
Reaction score
330
Points
63
Joined
Last seen

Profile posts Latest activity Postings About

  • 2
    2012 M6040. Im having issues with it stalling and it seems to be getting air in the injector. It all started when the 1/4" return fuel line popped off going back into the fuel tank. I put it back on. I didnt run it out of fuel or nothing. It would stall and starve for fuel at 2000 RPM and eventually die. I drained the fuel separator and have changed the fuel filter twice. I sucked the fuel out and then changed the fuel filter the 2nd time. I notice the fuel in the water separator cup gets about half way down at times. I have had to bleed the injector to get it back going. I did confirm that my O-ring was on my separator. Got any suggestions?
    Hkb82
    Hkb82
    Well, it definitely sounds like you have a leak or air getting into the system before the separator maybe the fuel line that popped off on you is sucking air in still?
    L
    Hello Hkb82.
    I'd like to thank you for your response to Northwoods regarding his negative comments. I should've known you were a Canadian, even better in Ontario, since that's where I am too. I found his, and a few others', pretty discouraging. I'll be posting an update with more info later today if you're interested.
  • Loading…
  • Loading…
  • Loading…
Top Bottom