Recent content by Green Acres

Do I need to disconnect the battery from Tractor? Instructions on the B&D 6/12 volt battery maintainer mentions "On Board Computer" could be damaged...Even though there is not one on my L3301 like a vehicle, just want to be safe with the electronics on it. Thanks.

Changed mine at 76 hours, 99 hours and 126 hours.

7 hours on mine with just over 3/4 tank left. :) I even looked in tank to be sure it was right.

Thanks Darren!!

Hi, what size impact wrench would I need to use on my L3301? 1/2 - 3/4 and how big cfm - ft. lbs. thanks

Make due with what i have, no $$ for one;)

Used FEL to move some of the wood pile from around the old Oak tree. It was a monster tree, over 11' circumference and just 10 feet from house.

Thanks MD! I did not realize they would do that so quick.

Edited and a little better, not there yet, Thanks!!

Bulldog, you are right but My funds are low or i would :) Thanks for the tips!!

Thanks Frank, I will check out the oil pan heater. Coolant is -10, that's the way it came from dealer last March. My Jeeps are -20 to -30, wondering if I need to do anything to lower it? Looking for best (Cheap) trickle charger.

Thanks Daren!

Happy New Year!! Winter just starting to make it here in the Ozarks, looking for any winterizing tips. I have looked at the old threads here, googled and found some good ones, just looking for some from the experts here. No barn or cover to store mine, any tips? Fuel additive - what do you...

Thanks for all the tips. Stubbyie it is Metric 25mm - I will try what you did:)

Drawbar has shank hole of 15/16 - measured and confirmed. NO shank ball found that size???