Recent content by Dwarner

Tractor is back together again and the bucket will dump while in float. It appears I was mistaken the 3 point does raise while in float. I did just replace the entire 3 point system on the tractor so it could have been air in the system or low oil. Still not sure about the port marking DFP on...

Sorry for my delay. This valve does not have a port marked PB the port is marked DFP. I will not be able to check if the bucket will operate with the valve in float because I'm in the process of removing the transmission because the 4 wheel drive is stuck in gear. I believe the lever dog came...

I recently picked up a Kubota B2400 with a LA351 loader. My problem is when the loader valve is in the float position the 3 point stops working all the hydraulic fluid is sent back to the tank. With the loader valve in any other position the 3 point works correctly. The loader valve has ports...

There is a BX 1500 that was hit by a tree for sale on Facebook marketplace. It is located in Nazareth PA. Could be a good candidate for parts.

No the hydrostat on my BX23 is different.

I have a BX23 and the case you need looks to be good. But when I look up a bx1500 hydro it had a different number I have the case from the hydrostat part number you are looking for however I believe your part number is incorrect. My hydrostat came off of a BX23. I PA there is a seller with a...

Best to text me at (MOD EDIT PM Contact info) if your interested.

I'm in CT and have a rck54-23bx

I had a similar sound on my B7610 a search suggested to reposition the front driveshaft cover. Turns out the driveshaft cover was rubbing on the driveshaft. Just loosen the 2 clamps and give it a try.

MB tractors in Springfield Just bought a finish mower $500 cheaper that others dealers.

There is a bypass plug you loosen a turn or so on the hydraulic pump.

Re: BX200 stranded in meadow Do you think it could be the clutch?

Re: For Sale B7100 HST Steering Box The steering box is sold.

Thank you for your input. Very easy tractor to split which will be the only way to check the PTO clutch.

I was told the clutch was replace about 5 years ago. The travel clutch disc, pressure plate assembly, release bearing and pilot bearing looked in new condition. I did not disassemble the pressure plate assembly to inspect the PTO clutch disc. The flywheel did not look like it was resurfaced but...