Recent content by countryboy9799

At first the clips were a pain but I always carry a pliers on the tractor now as they are very hard to get out without the pliers. My wife was complaining about the slippery wet hard pack snow/ice that was in front of our north facing 40x60 machine shed that we park cars in. Today we had temps...

I have a 2020 and when I looked at it the fan it looked like it had a shield in place.

Make sure you put the correct fuse in, I once had an unfused wire in a cab short out and it filled the cab with smoke in about 1/2 second!

I think a 60" would be to big for my BX2380. For our driveway it would be okay but not for dirt work/material moving.

You are correct in the BB will move material around and the blade doesn't move it around much. A lot is adjusting the angle of the top link, turning it so it is shorter will tip the front end down which will make the blade in front cut more aggressively and the teeth will dig deeper too so it is...

Totally agree! Blowing is far better than plowing for the long haul.

That's about what I paid for mine. The 54 was within 20 bucks.

A box blade is a very useful tool, I ended up getting a good deal on a rear blade later but I don't care for that as much as the box blade does a lot better job at leveling, at least for a beginner. It takes some getting used to for how aggressive of a cut to take and playing around with the...

I have found a great deal on this hitch and was wondering if there is any experience out there on this. It looks like the QH10 is better built but will the 05 be good enough? I mainly put a box blade, rear blade and a hitch I made for moving trailers around with.

Good to know, if the residential is handling the amount of snow you get I am sure we will be good with the 47" average we get. We rarely get over 15 and even those aren't that commen.

I ended up going with the 50" residential because it was about 1,900 dollars cheaper. I guess I just don't feel like the need/hyd. rotation can be justified right now. We are working on a major house project ATM and funds are getting thin. My thought is that I purchased a low end Murray blower...

It's getting to be that time of year where I need to get a blower for my BX2380. I have a fair amount to blow but I have done most of it with a 27" walk behind and 4 wheeler with a plow so even the 50" will be a major upgrade. I can get the 50" for $3,500 vs over 5K for the 55". It's my...

Hard to read the first post, is it going full throttle all the time or just blowing black smoke at full throttle?

Can you give us more information like hours and the history on it? I would start with the air filter first if it is running okay otherwise.

I am not sure if this applies to the Kubota tractors but I think he is referring to a vent plug that vents air inside that builds pressure as it warms up. I know 4 wheelers have them on the transmission, rear and front end because the pressure will push the oil out. Pickup front and rear...