BruceMc's latest activity
-
BI've been extremely happy with the JU Fabworks hook, loop, and hitch point bracket I put on my LX2610. I don't know if they ship to...
-
BBruceMc replied to the thread What did you do to or on your Kubota today?.A couple of small upgrades to the LX2620. Saw these on a Goodworks video. Made in Michigan, good quality welds, and fit like a glove...
-
-
BBruceMc replied to the thread Need advice on rear ballast.I used an adapter for the top link. Works fine. At some point I planned to weld a new bracket lower on the box, but so far...
-
-
BBruceMc replied to the thread Need advice on rear ballast.You can find a decent ballast box on Amazon for under $200 delivered (if you have Prime). I filled mine with sandbags.
-
BBruceMc reacted to Scm's post in the thread An interesting approach to cleaning out your fuel tank. BX, but may apply to others with
Haha.
you went 180? if you went 360, you changed nothing -
BA good place to START evaluating sales value is tractorhouse.com but be aware that these prices are asking prices rather than selling...
-
BBruceMc replied to the thread Clamp On Pallet Forks.When I bought my BX25 they were offering a BOGO on attachments. I wanted the plow blade, so added on the forks as an afterthought...
-
BFriends don't let friends buy clamp on forks. Especially from the "V" company.
-
BBruceMc replied to the thread Clamp On Pallet Forks.It's a lot less.
-
BI used the vevor ones for a couple years then switched to a proper set of SSQA forks. Never looked back and regret not doing that in the...
-
BMy rule with any machine is, if it just needs 'x' and the seller could fix it and get a lot more for it, why don't they?
-
BStill awaiting delivery on used B2650HSDC from Messisck's (adding a BH77). Did NOT have a Block heater from previous owner. So while at...
-
BI'll elaborate on not filling. A BX doesn't have a lot of lift capacity. And it's very stable without filled tires. Unless you have a...
-
BBruceMc replied to the thread Thinking of trading in my BX2680 for a B2601.I bought an LX2620 to replace my BX25 last fall. With the ROPS up, the LX is actually about 5" shorter. You wouldn't suspect that just...
-
-
BBruceMc replied to the thread Cutting edge needs replacement.I first added the bolt-on Kubota cutting edge on the BX25, then the standard BXpanded tooth bar. That way I can easily add and remove...
