Clamp On Pallet Forks

[edritchey]

Most people find that when they have ‘real’ forks, they use them more than the buckets. They are as handy as a shirt pocket!

My old BX23 had a pin on bucket so the clamp on forks were a good option for the little I used them. If I needed to move anything substantial I used a more capable machine. I agree the forks are handy especially the ones that open & close hydraulically.

 

[BruceMc]

Most people find that when they have ‘real’ forks, they use them more than the buckets. They are as handy as a shirt pocket!

When I bought my BX25 they were offering a BOGO on attachments. I wanted the plow blade, so added on the forks as an afterthought. Really didn't think I'd use them for much. Turns out I was completely wrong and the forks got more use than either the bucket or the plow.

 

[Bee-Positive]

2" x 4" pressure treated bolted in the same holes used by my BXpanded tooth bar. Not saying it'll fit a pallet or lift 100's of pounds but they sure come in handy and take about five minutes on/off.

 

[Runs With Scissors]

My Vevor stuff is “hit and miss”……but “mostly” hit………but I have had a few “bad apples”...

For 130 bucks, I would try them……..especially if you can order them thru the "Big A” since they have an awesome return policy.

Although I do agree that my forks are probably “more useful” than nearly any other implement,

So I could be swayed to convert my non-SSQA to SSQA, given the right circumstances, if that were the case.