Recent content by blaisek

Thank you, I will look into it

Post #5. 06 ROPS model

My tractor is to old for the computer fix and yes, only the dealer has the ability to do so on newer units

I will get some pics but I had the cluster apart and didn't see and removable ram.

Thank you for the responses. A little more info on my part. This is an 06 ROPS model and it did have some wiring issues where the cluster harness had rubbed in a couple spots and created some shorts and popped some fuses. I have found and repaired those issues but the LCD is still blank. The...

Hi all. Have two questions I hope you all can help me with. First. I lost the LCD screen which shows the hour meter and PTO speed and a couple other minor things. Is there a place that sells LCD screens that may have one that will work or could build me one off the dimensions? Kubota only sells...

I don’t think it’s a filter. They were changed 6 months ago. I plan on doing a little investigating today. I’ll post my findings if I have any successs. Thank you for the help. Much appreciated

The model is a M9540 DT. Appreciate the help

The loader works as expected. Lifts and tilts at idle. The 3 point start to lift till rpms are at 1500 or more and it lifts slow. At 1800 to 2000 it lifts at a decent speed. Do I still need to do a pressure check with this situation?

I didn’t think it was correct. Thank you for confirming my suspicions.

Hi all, I recently bought a used m9540. It’s an 06, 4wd, FEL and a rear box scraper. This is my first tractor so I’m not totally familiar on how things should operate. My question is: when the tractor is idling the FEL works but slower than if I’m at higher rpms. That seems correct to me. The...