Burt
New member
Equipment
L3700SU, box blade, 6 foot rhino blade, 1 bottom plow, 3 point receiver hitch.
Greetings!
Have any of you replaced their turn/flasher signals on the rear fenders with LED's? IF so, does the flasher work properly? By that, I mean, hyperflash or get stuck? LED's as you know require less amperage. A typical incandescent will draw about 1 amp and and LED about half that amperage.
A standard non flashing LED would likely be OK but the flasher unit itself may need to be changed out in order for LED's to work properly.
Since Kubota doesn't offer replacement bulbs in a standard base nor LED bulb replacements, I'm thinking of replacing the entire stud mount turn flasher housing with an LED double face from Superbrightleds.com.
I don't think Kubota will want to deal with this as it a bit off the bell curve of standard questions or issues.
Thanks for any answers.
Burt
Have any of you replaced their turn/flasher signals on the rear fenders with LED's? IF so, does the flasher work properly? By that, I mean, hyperflash or get stuck? LED's as you know require less amperage. A typical incandescent will draw about 1 amp and and LED about half that amperage.
A standard non flashing LED would likely be OK but the flasher unit itself may need to be changed out in order for LED's to work properly.
Since Kubota doesn't offer replacement bulbs in a standard base nor LED bulb replacements, I'm thinking of replacing the entire stud mount turn flasher housing with an LED double face from Superbrightleds.com.
I don't think Kubota will want to deal with this as it a bit off the bell curve of standard questions or issues.
Thanks for any answers.
Burt