Elliott in GA
Well-known member
						Equipment
					
					
						LX 2610SU w/535,LP RCR1860,FDR1660,SGC0554,FSP500, DD BBX60005
					
				
			I have probably spread close to 40 tons of Crusher gravel with my loader and box blade over three projects:  35 x35 foot site (flattened and leveled), 15 x 30 foot service yard area of private RV site (filled and smoothed) and reconditioned gravel driveway (filled and smoothed).  Although not as handy as a T&T, with some practice you can feather out the box blade using the 3 point control.  I found it relatively easy to do a good job; it usually takes a pass or two to determine the best starting and finishing height.  However, it would be much more difficult to do if you did not have Position Control for the 3 Point Hitch.
	
		
			
		
		
	
								 
				 
				
		 
 
		 
 
		 
 
		