Parting out F2400 with 72” Deck

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,858
113
Sandpoint, ID
How much is always good to add to a post.
and Why parting it out?
What's bad on it?

If it was closer and/or I could get into Canada, I would really consider it.

I really want one of these!
 

sfsouter

New member

Equipment
F2400
Apr 8, 2020
7
0
1
Spruce Grove, Alberta, Canada
These machines are held together between the rear engine section and the front transmission section by a steel frame the bolts into the transmission casting. My casting has a few of the mounting bolt holes broken off which caused the machine to flex and take out the clutch and related shafts between engine and transmission. If someone was a decent welder they could weld up reinforcements off other areas of the frame, but the correct factory fix is a new high/low speed transmission casting, the two shafts, new friction plate, release bearing, etc. The 72” deck is perfect and has a new drive shaft. I’d let it all go for $1500 usd or $2100 cad at this point.


Sent from my iPhone using Tapatalk
 

sfsouter

New member

Equipment
F2400
Apr 8, 2020
7
0
1
Spruce Grove, Alberta, Canada
I just checked and the engine for this tractor is a D1105ER-AG. Rebuild cost I found online is $3275 USD plus $1000 USD core charge. My engine runs like a champ!


Sent from my iPhone using Tapatalk
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,858
113
Sandpoint, ID
I'm really interested in the whole unit, I'd like to see some pictures, I'm working on a way to get it down here. ;)
 
  • Like
Reactions: 1 user