Hello and tank you in advance for any help you can give me! I am now to this forum, and to tractors generally. We had a kubota mower many moons ago but i just recently upgraded to a BX 2380.
Problem: mower is way off height wise and i cannot for the life of me figure out how to get it adjusted. With the knob set to 4" the blades are at 2.125 inches off the ground. The knob seems to make correctish adjustments from there, meaning that it lowers when you set it lower than 4 inches until it hits the ground. This is with the linkage attachment bolts all the way in (i know thats not how to balance, was just looking for more height so i could get my grass cut). Tire pressure is correct front and back (industrial). Sent it to the dealer, they claim nothing wrong and dropped it back off. Called me while measuring it and said it measured 4 inches when set to 4, dont see how thats possible as i cannot get that to repeat.
Any ideas in where i could start looking? Would like to avoid sending it back and fourth again since i dont have a trailer/they take forever.
Thanks!
Sent from my SM-G950U using Tapatalk
Problem: mower is way off height wise and i cannot for the life of me figure out how to get it adjusted. With the knob set to 4" the blades are at 2.125 inches off the ground. The knob seems to make correctish adjustments from there, meaning that it lowers when you set it lower than 4 inches until it hits the ground. This is with the linkage attachment bolts all the way in (i know thats not how to balance, was just looking for more height so i could get my grass cut). Tire pressure is correct front and back (industrial). Sent it to the dealer, they claim nothing wrong and dropped it back off. Called me while measuring it and said it measured 4 inches when set to 4, dont see how thats possible as i cannot get that to repeat.
Any ideas in where i could start looking? Would like to avoid sending it back and fourth again since i dont have a trailer/they take forever.
Thanks!
Sent from my SM-G950U using Tapatalk