Search results

I thought that may be the case, because when you look at the loader book it describes precisely what you are articulating. Thanks, M

I would agree with all said in an attempt to figure out the issue and surprised the B2410 is having any issue lifting the mower. I once had a B7610, and a Landpride 1560 finish mower on the back very similar to what you describe here and had no issue lifting the unit. One thing you must...

My B3300SU is equipped with a LA504 loader and 60" bucket. As background, when I push into gravel or dirt at the bottom of pile and then attempt to pick up while adding forward pressure going into the pile it seems like the loader brakes out-just outright failing to lift. However, when I...

I have a B3300SU and agree with the above post, might start with changing the filters, and changing the fluid as a starting point.

I have converted a John Deere, 54" hydro front blade to work on my Kubota B3300SU. The quick hitch bolts on in two places and the blade attaches with hydro up-down and left-right. I see no reason with some slight modifications, if any, this would work on B-series lineup. I'm asking $750. For...

I suspect the number of buyers which can spring for everything is relatively small vs. selling off a few things. For instance, the chipper and backhoe may have interest to individuals already in nice equipment and have no desire to purchase another tractor and that leaves you selling the...

That was a good buy and you will get tons of use out of it. Please be sure to let the rest of us know how valuable the "angle" is along with applications, because if I were to get a new one then that feature is something I would be considering.

I would try and find some PDF sheets on the rear transmissions and see if this is even possible. By chance, can you get the rear end off the other?

I like that $100 expense :D

I'm investigating my options on a cab, i.e., Curtis, Sims, etc., and found this one http://www.atvcabs.com/index.php?option=com_content&view=article&id=61&Itemid=69 so my question is does anyone know anything about these cabs? I would appreciate any input :D

Don, I'm not sure you will find much difference in overall "durability or repair cost" but down the road, there will likely be a difference in overall resale. I was a JD guy and went with the B series because in my opinion, JD had nothing really to compete with the series, i.e., two range...

I may not have communicated the surge in my tractor correctly, so I'm only posting this link as the example in hopes more individuals here on the Orange Talk may know more about the situation, see...

I installed a Kubota block heater ($40) and really like the way it works recommend it highly.

I have played/worked on a wide range of machines in the size range you are looking and would suggest trying your best to test them and then make the purchase. If that is not available, I would certainly look at something with a second hydro pump (believe that is the case on the B2620, not...

I wanted a front blade for my KubotaB3300SU and just didn’t want to spend $2,600 (new) to make this happen, so here is what I did and very satisfied. I located a 54” John Deere Blade off a 318 ($400), new lines ($150) with Kubota quick connects from the dealer ($50) and finally fabricated the...

Is it legal to have that much fun during Winter :D

I'm rather new to Kubota's, not to tractors and assume what I'm feeling in my tractor for time-to-time is normal, but thought asking may be a good idea here with Orange folks:) As background, my tractor is new with only 5 hours and for the most part only used in cold conditions (waiting on...

Not sure this is correct, but someone stated on a related webpage as a rule of thumb 5 PTO horsepower per foot and that would be pushing the edge on 60" which I have on my KubotaB3300 and it have no real problem using the unit and overs the rear times. However, I would not consider going over...

I decided to install a front blade on my KubotaB3300 from a yard find, one off a John Deere 318. The JD blade came with hydraulic cylinders for up/down and side to side, so I redid the hoses (new hoses/ends) and made a front quick hitch plate and all were installed yesterday. As further...

I have an extra operator manual for B7800, so make me an offer and I will sell it.