Search results

My L3010 HST lost oil pressure suddenly a while ago. I replaced the oil pick-up tube first then the oil pump. There is still absolutely no pressure. After installing the pump I pulled the engine stop lever and cranked the engine to prime the pump. After a while I let the engine start oil...

I' m trying to remove thetiming cover to replace the oilpu pump. The problem is that I can't get at the lower two bolts. There is a piece of frame material in front of the bolt heads. Removed the front axle to try to gain access also, still a no go. There is also a Schwartz Mfg. ( SMC) loader...

High all. Today my son was using my L3010 when the oil light came on. He had to move it a few feet with the light on then shut it down. There was a couple of circles of oil on the grass where he stopped and started, with a thin trail between the circles, about an inch wide. I went to look...

Here's something for you guys to think on. I'm in the process of building a grading scraper with a three point hitch. The dilemma is that the cabin road that needs grading is a little over an hour away. With the price of fuel my plan is to also build a trailer tongue with a 2" ball coupler...

Hi all! My L3010 has a Prince loader valve, possibly the LVR model, that is sticky. I'm overly familiar with hydraulic repair. So, I'm seeking the knowledge pppthe forum. The valve is a joystick version single lever, up/down/float, and curl/dump. The joy stick uses three ball/socket rod...

I'm just curious if anyone knows if there is any updated head light version other than the original?? The original bulbs are not very bright, and the retainer does a poor job of keeping the electrical contacts in place. I'm about ready to fashion an H3 bulb to retrofit it to a single beam that...

I could use a little help on this one. I tried jumping the PTO switch and the neutral switch, still doesn't crank. It acted up earlier today but then it started. Mowed for 2 hours, loaded it up to go mow another lot, and can't get it off the trailer. If some one has a wiring diagram can you...

Got home last night and went to start the tractor to finish cleaning up the 18" snow fall, turn the key and nothing!! It was working fine when I shut it down the night before. Thought I might have left a defrost fan on and killed the battery. The heater and defrost fan are wired hot all the...

Need some help with a pto problem. This afternoon I put the tiller on to do the garden. But when it engaged the ground and started to move the tractor forward it started to chatter and stalled the pto shaft. At first I thought that the slip clutch was slipping. So I went around and snugged...

Had a bad day yesterday while brush mowing . . . found a short sharp stump . . . with a front tire!!! Front tires hand some pretty bad weather checking to begin with. But that stump caused a "V" shaped blow-out . . . not repairable!! So, I have a pair of new 7x16 R1 Ag tires coming...

I've noticed lately that it seems that when digging with the loader with the RPM at about 2200, in 4wd, the engine will bog to almost a stall. This seems to happen when digging into a pile while pushing forward. RPM will also drop when using the brush mower in heavy wet grass to the point it...

Looking for tips and tricks to operating a grading scraper. Will be pulling the trigger on a land pride gs1572 soon. Curious about the re-crowning method on parking lots. Does one just start at the lower grade and work to the high side? Will it be smooth from one pass to the next, or will it...