Search results

1995 B7100 hst 4wheel drive , 700 hrs. lost all hydraulic function , no fel, no 3 pt, no power steering. I was about 1/4 mile from house after blocking up front end loader I drove it home. Engine oil is now over full , and hydraulic oil is just above the low mark on the dip stick. Do you...

I want to flush the radiator and engine block on my B 7100. Since it does not have a water pump, what is the best way to flush the engine block ? Does the B7100 require special antifreeze? Is there a better way that just draining it , filling it with clean distilled water and running it for...

1995 B 7100 hst 4 wheel drive. Does anyone know if I have to take the rear wheels off to pull out the strainers in the hst, to clean them? I have about 7" of clearance between the housing and the wheel, but I can't find any data on how long the strainers are. My rear tires are loaded with...

Does anyone know where I can find a drawing or a picture of a Kubota BL 1767 Quick Hitch? This is the quick hitch that works with a pin on bucket. I want to make one for my B7100 , but I would like to see a picture or drawing of one before I try to make it . I am making a fork attachment...

I have a 60"tiller that I use behind a large tractor, and I have some land about 90 miles away from the farm that I want to put some food plots on. I don't want to haul a 7000 lb tractor that far, so my question is can I take the out side tines off and make this about a 50" tiller and use it...

I know how much we all like pictures, so I thought I would start this thread to see what out there and to get some new ideas. My Tractor is a 1995 B7100hst 4WD. Brush forks Made from 1 1/4 " rebar from the scrap yard cost $.22 a pound , Reciever hitch I made to move trailers. , Wheel...

Does the 1995 B7100 hst 4 wd have two hydraulic screens that need to be cleaned or just one? I thought their was just one and then I looked on Kubota parts and they show two. Can anyone tell me for sure before I take mine apart. The only reason I mind taking mine apart is that my loader...

Not sure how to figure the % of lead for the tires I want to try? I have a B7100 with turfs. Front 20.5x8-10 Rear 29x12.5-15. Has anyone considered putting these on turf rim for more traction. Front Titan Tru power 18x8.50-10 Rolling Circumference 56" Overall Dia. 18.5" Rim...

Just trying to see how big a picture size I am allow to post, and which size looks the best. Which size do you like best, numbering from left 1 to 5? mike

Front End Loader control valve Two spool, open center, power beyond. (1) Why do you need a low pressure return back to the tank when you have power beyond hooked up? (2) When would there be a flow in the low pressure return, when I have power beyond going to another valve and then to...

Replacing the FEL valve on my b7100. The valve I am looking at has a relief valve set at 2000psi, my tractor only puts out 1725psi , and it has a built in relief valve on the 3pt hitch . Would it be ok to use this valve, with a higher relief setting than the tractor puts out? mike

I have a 1995 B7100hst and I have a kubota loader 1640A on it. I had to alter the sub frame to make this loader fit , but i got it cheap and it was well worth it. The control valve on the loader has been leaking through and the buckets uncurls, this has gotten worse and I have decided to replace...

Can someone tell me and after market paint to match the frame color of the late model B7100 ( Gray). My dealer does not carry the gray color paint. mike