Recent content by Ancbill

I say no. 90 x 110 = 9,900 watts. You only have 2000. But I'm no electrician! Sent from my iPad using Tapatalk

I live in Alaska and there is only one dealer in the entire state. Needless to say.....I pay more for everything! Sent from my iPad using Tapatalk

Yes I got one this year. Used it on my rutted driveway and it worked great. Simple to setup, just get the top link adjusted so the runners are flat on the ground then have it. It removed all my ruts and pot holes. Next year I will get 40 yards of crush rock delivered and I'll use it to spread...

Pick up my brand new trailer Saturday. 7000lb gvw, double axle with brakes all around. 8.5 x 16 foot flat deck. I will put it to work Labor Day when I take my tractor to my cabin 2 hours away over the mountains.

Well the Craigslist trailer didn't make the cut. Wasn't the most robust frame and no brakes. Went and looked at new and decided to go that route. There just isn't that much used selection in Alaska that is worth it. If the dealer has one more in stock I 'll get it this week. It is 16 ft...

Thanks all. I found a used 16' with double axels. Will call on it tonight. Sent from my iPhone using Tapatalk

I'm looking to buy a trailer to move my bx2360 with a loader and box blade. I will be moving it about 2 hours between my home and cabin, twice a year. Is a single 3500lb axle trailer enough? It is 14 ft long. Figured I could put the box blade in my truck bed. Thoughts? Sent from my iPad...

Instead of a weight box get a scrapper blade. I use mine when the snow is 4" or less, faster than the blower. I have studded my front tires, keep them in year round. Chains n weights on the back of course. But you lower 48 ers are all having the fun this year. Haven't started my tractor in a...

I've been drooling over that grapple, but I'm afraid to ask how much. Especially when you include the third function kit.

That is really slick! Great job! What size cylinder is that, rod dia and stroke? Can you take a pic of the front cylinder mount? Just scrolled back and found a photo of your mount. I think it is going to hold up great now.

Here is an idea for you. To prevent tearing up something when the worm drive reaches the last tooth on the shoot. Simply cut teeth in the shoot all the around. So worst thing that would happen is you would blow snow in your face if you didnt stop the shoot rotation fast enough. I've thought a...

I just cleared 12 inches of powder, yesterday it was 6 inches. I'm on my third season with my 2750d and it is still operating great. I do keep up on the chain oil and other grease fittings.

I use chains that form a diamond pattern between the crossbars the chains also have "studs" welded to them. My bx2360 has the r4 s and I've never had a problem with the chains going between the bars. I also installed studs in my front tires, they really help too.

Keep us posted on the next improvement phase.

Bgbill, this is going to be difficult to type my question, but here goes. The four bolts are they tapped into the top of the pivot cylinder? Are you still using the original "dish" that the crown nut held on? Or does the "dish" have over size holes for the bolts to pass through? Could you take...