New profile posts

Does anyone know of an isolator that fits onto a JAPANESE battery. I bought one that had a green knob to connect or disconnect power but unfortunately the post that connected to the existing negative cable clamp was too big and although you can remove the post I cannot find anybody who supply the smaller size post

Hi. I Just found your post and it has been very similiar to your experience, but I was stubborn and never had them send anyone. I am about to order the Denso Relay under the dash, but you said you removed the dash and found two relays. I have loosened the dash but have not removed it, was wondering if you have pics or part numbers for the two relays you ordered.

Thanks for the post and following through on the fix. I was getting the same "mouse chewed wires" story and could not find anything either, but once I unplugged the black wire from the starter it quit trying to engage.

Thanks again for the post.

New to the site. Purchased 3 acres of property in Kalama, WA - some small hills and will be building a house there. Some blackberries, most of the property will be kept wild, with about an acre will be somewhat groomed. Another acre on the Hood Canal I use as an RV site, mostly need top mow wild vegetation down and some movement of rocks and felled trees. What size Kubota should I be looking at to groom both sites with periodic moving of gravel and dirt especially at the home build site.

Do u still have the LA513 Loader? price?
Best to connect via PM
thanks

BX2200D owner and love it

I'm trying to find out what size grease fittings i have on my Kubota L3301. It's located on the front bucket lift. It takes a 7/16th wrench and the threads are tapered.

A spring has become detached between the governor and the fuel pump my schematic isn’t very clear as to where it goes my machine is a kubota 36-3

Looking for the OPC timer on my L3830 and a test procedure if you can share it would be great , thanks in advance

Not being a paid advertiser on Orange and Green Tractor Talk, I have to be careful of what I say.
Best thing to do is fill out the Fit Rite contact form and we can go from there.
At least I can get you some costs to consider.

Thanks for your great information (about my T1400H wiring) I tried to reply, but something screwed up. Just wanted to be sure I said thanks! Steve

Just planning out the ZD331LP Turbo grassrod At 161.0 on the clock it wants to overheat after 20-30 minutes run time. Belt is about 10 yrs old n worn. Replaced it with a slightly longer one to accommodate a real alternator. Why not power some lights to mow at night so it gets more than 12 hrs a year on it. There is enough power left to run a fan after all that booger man repellant was installed. Not a rad fan. No way. A pair of 7” for the intercooler mounted right under the custom hood scoop. The cooler charge will surely solve the over heating issue. Boost cures all ailments

B2650hst rops safety switch locations? I know of under seat, two under seat compartment near hydraulic motor, and 1 by hst pedal for neutral. Any missing?

machine starts and runs but can't put in gear forward or reverse without the motor dying

Switch to a different browser. I use Brave and it blocks almost all of the ads. Give it a test drive and see if you like it.

Hello l have a kubota l35 blows the slow blow 40 amp fuze when turning key isolated all my relays looked for bare wires still can’t find anything any suggestions would be appreciated

hello. Been a while. Just added an L3650 to keep my G6200 company. Very cool and powerful tractor.

Bought a new TMG TFM-060 and put it to work this last weekend. I had some reservations about buying a cheep flail mower, but it held up well despite the multitude of rocks that I found on the unmaintained pasture.

Would you happen to have a ”joint” per kubota, for a L2950 part number 36830-63210? It connects to power steering hydraulic line to the “rack and pinion”. MBtractor let me order then canceled. Also kubota says it is discontinued without a replacement.

I did make the deal, I will get pics posted soon.

jut reaching out to you on a question , was this a open or closed center valve