New profile posts

New to the site. Purchased 3 acres of property in Kalama, WA - some small hills and will be building a house there. Some blackberries, most of the property will be kept wild, with about an acre will be somewhat groomed. Another acre on the Hood Canal I use as an RV site, mostly need top mow wild vegetation down and some movement of rocks and felled trees. What size Kubota should I be looking at to groom both sites with periodic moving of gravel and dirt especially at the home build site.

Do u still have the LA513 Loader? price?
Best to connect via PM
thanks

BX2200D owner and love it

I'm trying to find out what size grease fittings i have on my Kubota L3301. It's located on the front bucket lift. It takes a 7/16th wrench and the threads are tapered.

A spring has become detached between the governor and the fuel pump my schematic isn’t very clear as to where it goes my machine is a kubota 36-3

Looking for the OPC timer on my L3830 and a test procedure if you can share it would be great , thanks in advance

Not being a paid advertiser on Orange and Green Tractor Talk, I have to be careful of what I say.
Best thing to do is fill out the Fit Rite contact form and we can go from there.
At least I can get you some costs to consider.

Thanks for your great information (about my T1400H wiring) I tried to reply, but something screwed up. Just wanted to be sure I said thanks! Steve

Just planning out the ZD331LP Turbo grassrod At 161.0 on the clock it wants to overheat after 20-30 minutes run time. Belt is about 10 yrs old n worn. Replaced it with a slightly longer one to accommodate a real alternator. Why not power some lights to mow at night so it gets more than 12 hrs a year on it. There is enough power left to run a fan after all that booger man repellant was installed. Not a rad fan. No way. A pair of 7” for the intercooler mounted right under the custom hood scoop. The cooler charge will surely solve the over heating issue. Boost cures all ailments

B2650hst rops safety switch locations? I know of under seat, two under seat compartment near hydraulic motor, and 1 by hst pedal for neutral. Any missing?

machine starts and runs but can't put in gear forward or reverse without the motor dying

Switch to a different browser. I use Brave and it blocks almost all of the ads. Give it a test drive and see if you like it.

Hello l have a kubota l35 blows the slow blow 40 amp fuze when turning key isolated all my relays looked for bare wires still can’t find anything any suggestions would be appreciated

hello. Been a while. Just added an L3650 to keep my G6200 company. Very cool and powerful tractor.

Bought a new TMG TFM-060 and put it to work this last weekend. I had some reservations about buying a cheep flail mower, but it held up well despite the multitude of rocks that I found on the unmaintained pasture.

Would you happen to have a ”joint” per kubota, for a L2950 part number 36830-63210? It connects to power steering hydraulic line to the “rack and pinion”. MBtractor let me order then canceled. Also kubota says it is discontinued without a replacement.

I did make the deal, I will get pics posted soon.

jut reaching out to you on a question , was this a open or closed center valve

Hi, my kubota mower has states looking power after about 40 minutes of mowing . After a break seems to
Recover amd will do another 40 is minutes . Also when this happens here some grinding kind of noises from engine
Thén these too disappear after a break. Have check angina and hydronic oils, both ok. No signs of over heating,
, now what