Woods BH75-1 on Kubota L3301D

[Scott]

I just picked up a Woods BH75-1 for my L3301D. It came off of a L3301. I'm looking for a manual and install instruction for the subframe. Basically what bolts I need or reuse from the loader mount or ROPS mount. Thanks.

Any help on the "power beyond" kit number would be appreciated too. I do have a 3rd function installed.

 

[TheOldHokie]

I just picked up a Woods BH75-1 for my L3301D. It came off of a L3301. I'm looking for a manual and install instruction for the subframe. Basically what bolts I need or reuse from the loader mount or ROPS mount. Thanks.

Any help on the "power beyond" kit number would be appreciated too. I do have a 3rd function installed.

I cant help with the subframe but power beyond is just two hoses, a male/female quick coupler set and if you want to get fancy a frame mounting bracket for the coupler. Roll your own for about $75 in parts.

Dan

 

[Scott]

If i understand it correctly, I'd disconnect the tank line from the 3rd function. That line would now be my tank line from backhoe. I'd put new hose from 3rd function tank port to backhoe pressure. Basically plumbing the backhoe in series between the 3rd function and the tank.

 

[TheOldHokie]

If i understand it correctly, I'd disconnect the tank line from the 3rd function. That line would now be my tank line from backhoe. I'd put new hose from 3rd function tank port to backhoe pressure. Basically plumbing the backhoe in series between the 3rd function and the tank.

You have the plumbing right but that is a power beyond line not tank. Its an important distinction that yiu need to understand.

Dan

 

[Sammy3700]

I also used to have a b7500 and woods was great to email all manuals so I could print them out

 

[TheOldHokie]

I also used to have a b7500 and woods was great to email all manuals so I could print them out

The BH75 manual is online here

https://assets.oregontool.com/adaptivemedia/rendition?id=ef6d2b65e9490a871c8d79c66dd5e05448722c94

 

[Scott]

I also used to have a b7500 and woods was great to email all manuals so I could print them out

I'll reach out to local dealer first but if that doesn't work, I'll contact Woods directly. Thx

 

[Scott]

The BH75 manual is online here

https://assets.oregontool.com/adaptivemedia/rendition?id=ef6d2b65e9490a871c8d79c66dd5e05448722c94

Thanks

 

[Scott]

Woods was quick to send the subframe manual.