Looking for opinions on rear wheel spacers, I know they can put more stress on rear axles and bearings but I sure would like the extra stability and look. I am thinking about putting 2" spacers on a l39 tlb. I guess it would void the warranty if something happened because of them. Has anyone had any problems with wheel spacers?
wheel spacers
- Thread starter joedert
- Start date
Little Orange
Member
Equipment
Kubota BX25D TLB, hitch frame, FEL forks, 3pt steel ballast and back blade
rear wheel spacers work great and lots of treads and posting on their merits.
as tech. reps here say the tractor can handle it. I used 3" on the BX25D and no fronts, works like a charm.
as tech. reps here say the tractor can handle it. I used 3" on the BX25D and no fronts, works like a charm.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Not much of a chance that you will do any harm at all with 2" spacers, The AG version with AG tires and rims will allow you to move the tires out much farther than that! 
Check for rim offset as some of them you can swap the tire/rim sets to the other side and they will move the wheel out, I know mine do.
Check for rim offset as some of them you can swap the tire/rim sets to the other side and they will move the wheel out, I know mine do.
Last edited: