What to look for in a used bandsaw mill?

[marrmanu]

I got a line on a used woodland mills bandsaw that i will be taking a look at, any suggestions on problems to look for.

Thanks Mike

 

[Runs With Scissors]

Just off the top of my head, I would probably think that the bearings that help align/guide the main blade would need to be looked at for excessive play.

For that matter all the exposed bearing should probably be looked at.

They appear to be gas powered, so checking the oil would be prudent as well.

Can you test it?

That would be a nice thing for sure.

 

[mikester]

Much better forum for your questions

Sawmills and Milling

Questions and discussions on sawmills, and the milling of lumber Sawmills and Milling sponsored in part by: [br][url="https://woodmizer.com/"][img]https://forestryforum.com/woodmizer_board.gif[/img][/url] [url="http://www.cookssaw.com/"][img]https://forestryforum.com/cooks_board.gif[/img][/url]

forestryforum.com

 

[marrmanu]

Thanks for the responses.
The mill is a 2022 only had 13 hrs on it. All seemed right and tight. Started right up and ran nicely although it was not under load.
I'll for sure be joining a sawmill forums now that I own it.

 

[fruitcakesa]

Thanks for the responses.
The mill is a 2022 only had 13 hrs on it. All seemed right and tight. Started right up and ran nicely although it was not under load.
I'll for sure be joining a sawmill forums now that I own it.

I bought my 2021 HM126 used with 45 hours on it. Just tested it to make sure it ran and towed it home. Been sawing like a fool till the weather shut me down and already have nearly 80 hours on it
They’re good machines