What ROPS toolbox are you using?

[trackman23]

I'm looking for recommendations on which toolbox to mount to my MX4800. I have searched online and came up with many options, none of which seem to have favorable reviews so I figured I would post here and see what folks are using. My only requirement is that whatever I get, that I can mount it without drilling holes.

Thanks!

 

[jyoutz]

I'm looking for recommendations on which toolbox to mount to my MX4800. I have searched online and came up with many options, none of which seem to have favorable reviews so I figured I would post here and see what folks are using. My only requirement is that whatever I get, that I can mount it without drilling holes.

Thanks!

I just removed the useless plastic Kubota box on the ROPs crossbar and installed a metal toolbox using ubolt clamps. I did have to add a piece of flat steel to extend the SMV sign further back to avoid the toolbox. I also had room to install a small 50 caliber ammo box in front of the sign next to the tool box using c clamps. I use the ammo box as a glovebox for small items.

 

[Tarmy]

Here are mine.

 

[GeoHorn]

I simply took an ATV front rack and mounted it to my ROPS using (square-shaped) U-bolts

I.

 

[GrizBota]

Here’s a link to a write up I did for my tractor.

Tractor Storage Basket

The idea is very similar to @GeoHorn’s. If you do a search, there have been several discussions here on OTT in the last year or so about tractor storage and tool boxes.

 

[KKBL]

I simply took an ATV front rack and mounted it to my ROPS using (square-shaped) U-bolts

View attachment 119337 View attachment 119338 View attachment 119339 I.

GeoHorn,
This is same as I have been considering to mount on our L2501 to haul chain saw, gas & oil, chain, etc. Any down side or problems you have found with your setup so far?

 

[trackman23]

I simply took an ATV front rack and mounted it to my ROPS using (square-shaped) U-bolts

View attachment 119337 View attachment 119338 View attachment 119339 I.

thx but I quickly got distracted looking at the airplanes...nice to see some taildraggers in the hangar!

 

[Fladogman]

I went with a 50 cal ammo can

 

[GeoHorn]

GeoHorn,
This is same as I have been considering to mount on our L2501 to haul chain saw, gas & oil, chain, etc. Any down side or problems you have found with your setup so far?

NOne at all…. and the basket prevents any items being thrown up by mowers, shredders, etc from getting to the operator.