What am I missing here?

[murph1068]

So I bought a used Bx25D about a year ago and it came with this mower deck. I cleaned it up and went to try my hand at mounting it and it appears I may be missing something or this deck is older than what I've seen? The spacing is way short to line up for the pins to latch on it from the tractor. They are roughly 21 1/2 inches to center and the deck as you can see is at 16. Any clues as to what I got here? I have both front pieces to mount it to the frame as well as the quick disconnect shaft.

 

[1970cs]

What's the model number on the deck? All of the BX series have plastic covers.

Pat

 

[murph1068]

Sorry.....RCK60B-22BX

 

[1970cs]

Here is the implement matching chart for the BX 50-70 series. And a picture of an RCk60B-23BX

Pat

 

[murph1068]

Hmmmm....So is there a way of utilizing this deck at all? Seems the only difference is the rear mount. Does anyone have a pic of the top view of the correct deck for the bx25d? Thanks for the info Pat.

 

[Toyboy]

What's the model number on the deck? All of the BX series have plastic covers.

Pat

Not all of them. Mine has the metal covers for my BX2230

 

[murph1068]

In my limited knowledge and research it looks like the only thing I need to do is replace the balancer bar on this deck to accommodate the tractor. Can someone confirm this part number? K5381-51100

 

[1970cs]

Not all of them. Mine has the metal covers for my BX2230

That is true! But I sorta of corrected my statement with the matching chart 50-70 series.

Pat

 

[murph1068]

Here is another discussion with the same problem. Anyone here do this?

http://www.tractorbynet.com/forums/kubota-owning-operating/148308-bx24-mmm-compability.html