Had been moving an implement off a trailer with the FEL today. When done, I parked tractor for 15 minutes or so before moving into barn. As I pulled in and stopped, with clutch depressed, started to lower the empty bucket to ground, the tractor began to stall. Was at roughly 1700 rpm prior to stuttering. Before it fully died, I happened to hit the brakes and then engine resumed running normally.
I am new to this tractor (MX4800DT), so wondering if this is a safety switch, or any other thoughts.
Thanks!
I am new to this tractor (MX4800DT), so wondering if this is a safety switch, or any other thoughts.
Thanks!
Last edited: