TG1860 EPS Controller Flash Blink meanings

[okellyh]

My EPS controller's lamp comes on and goes off after about 5 seconds, which I think is normal.
But I have NO Power Steering
After cranking engine, The lamp on the side of the controller is blinking 6 times , then pauses, and continues to blink / flash 6 times, pause 6 times pause,, etc.

I can't find the meaning of the flashes/blinks , or how to relate them to an error code.
Can anybody shed some light or knowledge on the meanings of the little light.

 

[okellyh]

My EPS controller's lamp comes on and goes off after about 5 seconds, which I think is normal.
But I have NO Power Steering
After cranking engine, The lamp on the side of the controller is blinking 6 times , then pauses, and continues to blink / flash 6 times, pause 6 times pause,, etc.

I can't find the meaning of the flashes/blinks , or how to relate them to an error code.
Can anybody shed some light or knowledge on the meanings of the little light.

Possible clarification:
The controller box in question with the indicator light is referred to in the wiring diagram as the ECU.

 

[okellyh]

After talking with service manager at our local Kubota shop, Rose Country Tractors, I got the answer.
One long blink is = 10
each short blink = 1
so six short blinks is error code 06
one long and three shorts = error code 13

 

[rrussell82]

Were does the controller blink at?