This tractor came with my house (you might remember me from previous postings).. it had broken belts.. I fixed that.
Last week I started the mower up and ran it around the house 3 times, ran fine but was making a transmission whine so I posted here to ask about it.. turns out it was no big deal.
This weekend we took the valve covers off to replace the gaskets as they were leaking.. that went fine (broke one, but that is not my current problem).
After putting oil back in it we tried to start it (it had been sitting for 1 week, prior it had started just fine).. cranking and cranking on it, it would not start. Checking the plugs I see they are getting no spark.. So basically it is not starting because no electricity is getting to the plugs.
Research tells me this can be a couple things.. one of the safety measures is wonky or trigered in some fashion.. or a bad "ignighter"...
I feel this has to be something real simple because it worked fine just last week.. perhaps we hit something changing the oil or valve covers? Any ideas from those that know this tractor?
Last week I started the mower up and ran it around the house 3 times, ran fine but was making a transmission whine so I posted here to ask about it.. turns out it was no big deal.
This weekend we took the valve covers off to replace the gaskets as they were leaking.. that went fine (broke one, but that is not my current problem).
After putting oil back in it we tried to start it (it had been sitting for 1 week, prior it had started just fine).. cranking and cranking on it, it would not start. Checking the plugs I see they are getting no spark.. So basically it is not starting because no electricity is getting to the plugs.
Research tells me this can be a couple things.. one of the safety measures is wonky or trigered in some fashion.. or a bad "ignighter"...
I feel this has to be something real simple because it worked fine just last week.. perhaps we hit something changing the oil or valve covers? Any ideas from those that know this tractor?