I have a b7100 I bought new in 1992. I have never been able to get the suction filter out. The drain plug on the opposite side came out but not the strainer. At the time I believe I was using a wrench with a cheater and was afraid I would ruin the strainer so I just changed the fluid and filter. Recently I bought a 26mm six point socket and thought I would try that. Would it be better to use it with an impact wrench or a breakover bar and cheater? Thanks.
Suction filter B7100 won't come loose!
- Thread starter comfun1
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Use a breaker bar and a cheater if needed.
If you strip the nut, use a pipe wrench and then replace it with a new one.
If you strip the nut, use a pipe wrench and then replace it with a new one.