snow plowing pics

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
348
639
93
NH/VT NEK
Yesterday's snow clearing at -5F was about the coldest I have been out there as it is rare to get a meaningful dumping of snow with temps that cold. While we have a few mornings in the -20 to -35F each year I am not choosing to be outside longer than a few mins.

I was actually pretty toasty for the 2 hours I was out there. Long johns, Carhartt bibs, good socks, toe warmers and Muck boots. Wool base layer, electric heated vest, Carhartt hoodie and waterproof shell. Even though I was covered in some snow here and there I was toasty.

I adjust my rear blade a bunch during a clearing run, and I adjust my box blade a bunch in the non-winter months, I want nothing to do with dealing with a cab door each time I get on and off. If I were spending hours upon hours in a field in the summer etc. a cab might make sense but not for my use case......
 
  • Like
Reactions: 3 users

WI_Hedgehog

Well-known member

Equipment
BX2370 (impliment details in my Profile->About)
Apr 24, 2024
1,090
1,555
113
Milwaukee, Wisconsin, U.S.A.
...THEN I noticed the icicles hanging from the ROPs of pigdots OPEN STATION … and thought….” Now THAT Guy has BALLS. …they may have ICICLES on them…. but HE HAS THEM!

…AND THEN IT HIT ME…. WHY ONE REASON I live down in Texas... is..I may now be OLD….but, for Warmth… THIS STILL WORKS FOR ME!
Living in an Arctic Blast zone I can always put more clothes on, but in Texas I could only take so many off.

Nobody should have to see my
1769611534412.jpeg
😎
 
  • Haha
  • Love
Reactions: 5 users

GBJeffOH

Active member

Equipment
L4060, EA Grapple, 6' LP Brush Hog, 8' snow plow, 6' LP tiller, EA Forks, Spraye
Nov 17, 2014
289
116
43
Jefferson, Ohio
Got it done this morning. Racked up 1.5 hrs total for one pass last night and another today. We got 13" total, the last inch was sleet. That's THIRTY inches for January - a LOT for this area:
View attachment 168877

That seven-foot blade is plenty for the L2500, but I'm VERY pleased with the traction from the new, fluid-filled rear tires. Very little slippage. I can clear 8" of snow off the drive in one pass (down and back up). With the blade at an angle, I have to countersteer (to the L in this pic) to counteract the torque from the blade. You can just see the house through the trees to the R of the tractor, which gives some perspective of the slope I'm dealing with.

It was in the single digits all day yesterday. Was 20F when I started the tractor this morning. Cranked over about 4 revs before it fired. Battery is 7 years old. I find that, if I turn the key back off after it starts, it will charge up enough while it's running to crank OK a week later.

-Paul
NE Ohio 2015
 

Attachments

  • Like
Reactions: 6 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
3,289
5,598
113
Central Piedmont, NC
Already posted these elsewhere but might be the only chance I have to post snow plowing pics. Been close to 20 years since the last time I plowed snow.
IMG_7833.jpeg
IMG_7830.jpeg
IMG_7777.jpeg
IMG_5854.jpeg
IMG_7769.jpeg
IMG_7767.jpeg
 
  • Like
  • Love
Reactions: 6 users

Speed25

Well-known member

Equipment
L2501(sold) - BX25D
Apr 23, 2024
284
454
63
NC
Already posted these elsewhere but might be the only chance I have to post snow plowing pics. Been close to 20 years since the last time I plowed snow. View attachment 169229 View attachment 169230 View attachment 169232 View attachment 169233 View attachment 169234 View attachment 169235
Unlike you, I decided to wait until the snow stopped, haha. Got right at a foot of snow on top of the inches of sleet that were still on the ground. At least this snow was light and cleared MUCH more easily than the sleet last week. Gotta give the little BX credit, it handled it like a champ, though 4wd was needed going up and down the steeper hills.
 
  • Like
Reactions: 2 users

trikepilot

Active member

Equipment
B2620HSD LA364/BH65 48SQ Bush Hog LP FDR1660 LP RB1560 B2672 42in forks 5ft box
Jul 18, 2020
159
203
43
Hardy, VA
My first shot at it with the new-to-me front plow that I added hydraulics to.

20260201_142444.jpg
20260201_133330.jpg
20260201_133231.jpg
20260201_124627.jpg
20260201_122639.jpg
 
  • Like
Reactions: 6 users

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
1,146
1,618
113
N.Y,
We have had over 2 ft the last week. A little lake snow everyday adds up. The plles along the road are almost 8 ft now. That's my mailbox sticking out. The plow drivers are amazing
20260131_101854.jpg
20260131_104508.jpg
 
  • Like
Reactions: 3 users

JonM

Well-known member

Equipment
L6060,SA20,4in1,BH92,QH16,BS40,APS1572,RTR2570,HR2572,WC1504,FM2584,SBP1684
Nov 29, 2024
180
373
63
wisconsin
havent had much in the way of substantial snow so far. but last round that i got the blower out.

1000004691.jpg
 
  • Like
  • Love
Reactions: 5 users

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
1,146
1,618
113
N.Y,
I cleaned up a couple inches yesterday. That wind turned a couple inches into nice drifts. Should have put the blower on this year but didn't need it the last 2 years so didn't bother with it.
 
  • Like
Reactions: 3 users

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
399
291
63
Boyne Falls, MI.
Reading thru this thread…. The FIRST thing that I noticed was the pics some of our friends… (bragging on how they dealt with snow) …. pics of their snow-blowers mounted on CAB-equipped tractors.
THAT is when I thought: “ Geesh! Some of these rich-guys with Cabs ..simply don’t know what us REAL MEN do with Our Open Station tractors.”

THEN I noticed the icicles hanging from the ROPs of pigdots OPEN STATION … and thought….” Now THAT Guy has BALLS. …they may have ICICLES on them…. but HE HAS THEM!

…AND THEN IT HIT ME…. WHY ONE REASON I live down in Texas where 2-inches of snow closes the school-systems and roadways…. and the OTHER REASON is..I may now be OLD….but, for Warmth… THIS STILL WORKS FOR ME!

https://youtube.com/shorts/JDMBxYQOK_Y?si=OET196OYU1q0ZLPb
I blew snow from 1985 to 2021 on an open station tractor. I won’t bore everyone with my list of clothing I walked out the door with. After 36 years I now continually turn the heat down while using bare hands, no hat, and maybe a light jacket while listening to something entertaining. I don’t think I could go back to the old ways.
 
  • Like
Reactions: 1 users

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,729
1,985
113
West Mansfield, OH
Did drift/pile management on Sunday. Looking at those 7’ blades on smaller tractors than mine has me thinking. I’d also like to do the angled chute to get more throw out of the blade. My issue is once I get 12-14 on the ground I have created a sunken path that is hard to get snow flung out of. It also makes a great place for Mom N to drop her blown snow.
 

Attachments

  • Like
Reactions: 1 user