slow hydraulic loader response on mx5800

[skygolf]

my front end loader is responding very slowly. What could be the cause?

 

[i7win7]

Disconnect the hydraulic couplers and reattach. A lift cylinder coupler isn't fully seated, restricting oil flow.

 

[TheOldHokie]

my front end loader is responding very slowly. What could be the cause?

What function is slow and how slow is it? Backhoe orvrdmotes on the machine?

Dan

 

[Roadworthy]

If your three point control is in the full up position this can cause the loader to be slow. Try backing it off a bit. If this solves your problem your rock shaft probably needs adjusted.

 

[RCW]

If your three point control is in the full up position this can cause the loader to be slow. Try backing it off a bit. If this solves your problem your rock shaft probably needs adjusted.

Good thought - just drop the 3-point down and try it.

Just a small correction - - probably Roadworthy meant Feedback Rod instead of rock shaft. Both are components of 3 point.