size of fitting required for external hydraulic takeoff under seat on b 7100

[Balex]

The b7100 is down the lake and I want to take the right size fitting to install the hydraulic remotes when we are down there next, any one know the fitting size? under the seat
Im going to install a two way control valve lever to run a Hydraulic motor in forward and reverse with a return back to transmission
Lex @ NZ

 

[Stubbyie]

I don't know what NZ standard is, but the machine will be--should be--British Standard Thread (BST) fitting whatever size it is.

Do not try threading into the port anything NPT or IPT or (forgot the nomenclature) 'dry seal'-type threads. Might be ""close"" but will not be correct and will leak or blow out.

Get your local friendly dealer or hydraulic shop to let your buy a handful and return the unused. Get a wide selection and variety so you can plumb around obstructions and prevent kinking hoses.

Please post back with photos if possible so that we may all learn.