Service bulletins, product improvement bulletins question?

JohnDB

Active member

Equipment
M4500DT
Jun 9, 2018
376
63
28
NZ
Hiyas, does anyone know what service letters or bulletins Kubota published in the late 70s - early 80s, for augmenting or correcting their WSM, and what was/were the official name/s? I noticed in a WSM for the M4500 that there are a number of hand-written edits to dimensions which must have come from factory edicts and I was curious to know what title or name those documents had.
Thanks in advance.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,599
1,109
113
Kansas City, KS
Hiyas, does anyone know what service letters or bulletins Kubota published in the late 70s - early 80s, for augmenting or correcting their WSM, and what was/were the official name/s? I noticed in a WSM for the M4500 that there are a number of hand-written edits to dimensions which must have come from factory edicts and I was curious to know what title or name those documents had.
Thanks in advance.
They are "PSB"s and are used to update, announce, inform and correct service information.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,599
1,109
113
Kansas City, KS
Thank you Whitetiger
I'm guessing that PSB = product service bulletin? Is that correct?
That is correct. Here are a couple of examples of the old PSB's back when they were just SB's.
 

Attachments

Last edited:

JohnDB

Active member

Equipment
M4500DT
Jun 9, 2018
376
63
28
NZ
That is correct. Here are a couple of examples of the old PSB's back when they were just SB's.
OMG! Thanks for those, I'll have a look at the studs, and I haven't pulled the engine down but may need to at some stage.
Please tell me... what do I have to do to get a full set for the M4500 and S2600?
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,599
1,109
113
Kansas City, KS
OMG! Thanks for those, I'll have a look at the studs, and I haven't pulled the engine down but may need to at some stage.
Please tell me... what do I have to do to get a full set for the M4500 and S2600?
You would have to get a dealer to do searches and copy the PSB's for you
 

JohnDB

Active member

Equipment
M4500DT
Jun 9, 2018
376
63
28
NZ
Thank you, I'll try that.
No luck, 2 dealers I have tried say they can't retrieve anything that old, one of them spent time rummaging through stuff for about 10 minutes while I waited and couldn't find anything. Not surprising I suppose.