Hello, just picked up a grey market tiller RS1351 but didn't come with the upper articulating link. Anyone able to give me some dimensions of their top link so I can perhaps fabricate one? how long from top mounting hole on tractor to heim end link mounting hole? is that hole level with the hole on the tractor or does it come up higher etc... any pics and or dimensions would be greatly appreciated...and of course if someone has one for sale I'd be interested. Thanks!
RS1351 grey mrkt tiller help
- Thread starter sohogg
- Start date
Here's some pictures of the tiller if you mean there's a part missing there.
http://www.rbauction.com/KUBOTA-RS1351-3-POINT-HITCH?invId=3461164&id=ci
http://www.rbauction.com/KUBOTA-RS1351-3-POINT-HITCH?invId=3461164&id=ci
Thanks Birddogger! There is a top link from the top of the tiller to the tractor that articulates so that it can move and keep the shaft in place. Thats the piece I'm looking for some dimensions on so I can create one. I see you have a shaft are you selling any parts off it? thanks!
The top links are cheap enough to not be worth making one.
Look at this and confirm the pin diameters and length to match your set up.
http://www.tractorsupply.com/adjustable-top-link-category-1-0267759
The one source I have says your tractor is the Cat 1 hitch, but it's not the most reliable source.
Look at this and confirm the pin diameters and length to match your set up.
http://www.tractorsupply.com/adjustable-top-link-category-1-0267759
The one source I have says your tractor is the Cat 1 hitch, but it's not the most reliable source.
kubotasam
Well-known member
Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
He needs a special top link. It is like it folds in the middle. Here is a picture of one from an article that Service dept Vic put on this site.
Attachments
Last edited:
That looks weird as he77, like it will jam the u-joints on the shaft when raised
Now he has a picture anyway.
Now he has a picture anyway.
Yep that's the one! had a picture but was looking for someone who perhaps had one that could give me some dimensions on it... going to have to make one seems like unless I can find one.
kubotasam
Well-known member
Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
I thought that Service Dept Vic would chime in here and help. He must have access to one that he could measure for you.
Good luck.
Good luck.
Thanks guys...maybe I can figure out rough dimensions by the pic using the tiller as reference points for lengths... appreciate the help!