Question about adding SCV Valve to L3400

[bobsphotos]

Hello,
I have a New To ME L3400 with FEL that I want to add 2 hydraulic circuits to. I have read post after post on all the major forums and have decided to add a 2 spool valve. My local dealer has both kits to add one set of remotes but it would set me back $800. No Thanks !!!!
My question to any and all is this. Instead of tying into the PB circuit down at the floorboard, can I tee into the existing loader valve where I have marked it on the pic?
Bob Whitehead

 

[SidecarFlip]

Your loader is power beyond so any valves must dump into the transmission case. I'd buy the valves and add them to the back where they belong. Sometimes cheaping out can be=ring you more issues that you really want. Try Mid-States, they part out Kubota's all the time and probably have the vales a lot less than new.

 

[Kennyd4110]

Short answer: No.

Long answer: All valves must be added in series, or else fluid will "take the path of least resistance" and that would be the valve not commanded to do any work. You will also render you loader unusable. The ONLY line you can Tee is the low pressure return or "tank" line

If you read a bunch of other threads, you must have read that before, no?

$800 is a good price for 2 OEM spools, IMHO.

 

[bobsphotos]

Hey Kenny,
I have read that valves have to be in series but also forgot it. I guess what was confusing me is that the port I pointed out is marked "PB". I assumed that was where I needed to ty in the next valve.
The $800 cost for the Kubota OEM Valve is for a single spool. I doubt a double is even available for the L3400. If I can figure out the plumbing, I can do this aftermarket for a third of the price.
It might be best if I start a new thread and try to find someone who can help me figure out the plumbing.
Another option would be to buy the Kubota hose kit which would get me started.
Thanks,
Bob W