I have replaced my PTO speed sensor. The problem is that I can't get it register my PTO RPM on my instrument panel. It says PTO in not connected but it is, will it need to be reprogrammed?
PTO Speed Sensor Indicator
- Thread starter Realdeal
- Start date
What lead to the decision to replace the sensor?
How did you determine the problem was not with the Intellipanel?
The WSM talks about setting a pto coefficient but this seems to relate to an Intellipanel replacement.
I do not know this system and am only reading the WSM.
Dave
How did you determine the problem was not with the Intellipanel?
The WSM talks about setting a pto coefficient but this seems to relate to an Intellipanel replacement.
I do not know this system and am only reading the WSM.
Dave
Most likely the switch is still good but has too much debri around the tiny little button that depresses. Take it off and clean good and it will start working again. I've done this on 2 different l series. It takes about 10 minutes to fix