Parting RC60-71B

[fender76]

I have what appear to be good used gearbox, spindle assys & some mtg hardware for the above mower.

Roger

 

[mysterymanzappa]

Spindle tight?

 

[fender76]

Seem to be, I grabbed each pulley and they do not wiggle. However, at the moment they are under pressure by the belt. Which spindle are you interested in?

Roger

 

[mysterymanzappa]

Left side opposite discharge

 

[fender76]

I will release belt tension & check l outer for you.

Roger

 

[fender76]

I released belt tension & no lateral movement on the left spindle assy. Spins, with some drag, because the blade is still attached.

Roger

 

[mysterymanzappa]

Thanks. How much?

 

[fender76]

$115.00 shipped.

 

[BobInOK]

What y gotta have for one of the gauge wheel arms? Not sure if I need the right or left, will look when it gets light outside. They may be the same?

Where in MO are you?

Tks,

 

[fender76]

These are not perfect, the have been welded on. I'll take pics and post them for you.

Roger

 

[fender76]

The right arm is untouched, the left has been welded at the extension end. I don't know why one extends & the opposite does not.

$50 for the R
$35 L
plus shipping

Roger

 

[BobInOK]

I will take the right one, might also need one wheel.
Where in MO are you located, wife has a sister in MO she visits often.

 

[fender76]

St Joseph-N of KC

send me a pm w/ your information, I'll return w/mine

 

[BobInOK]

On my way over to the PM's, this is what I am dealing with. Can probably fix it and haven't really taken a hard look yet. Just hoping he didn't weld through the pin holes to secure the wheel fork.

 

[fender76]

Bob, return pm sent

 

[mysterymanzappa]

I'll take the spindle.

 

[fender76]

Paypal works best, but any method you wish. PM your information.

Roger

 

[fender76]

Mysteryman, PM sent

 

[berky]

Mysteryman, PM sent

sending you a PM also. Do you have any parts left?

 

[Hosanders]

good morning - what about the gear box - do you still have it? I have and MR 4800 - in your pics, it appears to be identical.