So today I thought I would attack the fel bucket edge. I saved my old fisher cutting edge from last year. 5/8 thick . I cut the old one off and welded the fisher edge on. Weld all the way across on the inside and 6-4" spots along the back. I left it proud on the ends so I can reinforce from the front edge back to the bucket side with a piece on each side. The edge sticks out 4"farther than the stock edge did. I got to say it really stiffened up the bucket! I went and scraped a little down the drainage cut and it works better than ever.
Sorry no pics, the site will not let me post.
Sorry no pics, the site will not let me post.