Hi all,
My right hand rear link for my MMM on my BX2200 got bent recently. This caused it to twist and put extra strain on the clip at the end where the spring pin connects it to the mower. Due to the added stress the metal clip broke off the rear link arm. Getting a new arm is about $275, so I was hoping someone had a used one.
I have also considered removing it, attempting to straighten it and then fab up a clip to weld back on somehow.
Kubota part number is K2561-44310
Here is the diagram. It is part 140 on the diagram
My right hand rear link for my MMM on my BX2200 got bent recently. This caused it to twist and put extra strain on the clip at the end where the spring pin connects it to the mower. Due to the added stress the metal clip broke off the rear link arm. Getting a new arm is about $275, so I was hoping someone had a used one.
I have also considered removing it, attempting to straighten it and then fab up a clip to weld back on somehow.
Kubota part number is K2561-44310
Here is the diagram. It is part 140 on the diagram