Need help

[hillbilly162]

I have a 93 b7100 hst and i just got a b748b snow blower how does it hook up the guy i got from had on a alice with front pto clutch how word it work for me

 

[Dave_eng]

I have a 93 b7100 hst and i just got a b748b snow blower how does it hook up the guy i got from had on a alice with front pto clutch how word it work for me

Do you have all the mounting hardware? If not it will be next to impossible unless you are an experienced fabricator.

The blower is a single stage belt driven unit. Older B7100 had provision for an electric clutch attached to a stub shaft on the front of the engine crankshaft.

I recently tried to help a friend mount a mid pto driven front blower on a B7100. Even though I could find part numbers for the mounting hardware, nothing was available anymore.

You would also need to find the optional hydraulic block to power the blower hydraulics.

You would be much more successful getting a rear 3 pt blower working.

Dave

 

[hillbilly162]

I have all the mounting stuff just didnt know to hook up on front or mid pto to hook up on mid I'd need to mod some things to hook up on front i have to get that part with a clutch

 

[Dave_eng]

Look at this manual on eBay:

https://www.ebay.com/itm/Original-K...lation-Instructions-B6100-B7100-/173511949033

Another B7100 owner made this comment:
Bought a mid 60's vintage ford ac compressor clutch and it is exactly the same

Dave