I have a M8200 with a cab. I think it's about a 2000 or 99 year model. The speakers have never been replaced. I tried to remove the speakers today but cant get the screws to come out. They just spin and spin. I looked it up and it says its because there is a nut of the back side of the headliner that has come loose. Is there anyway to get these out without removing the top of the cab?
Need help with replacing speakers
- Thread starter MatritKlutz
- Start date
sounds like the 'engineer' that designed it, needs to come over and show you how HE can remove them !
Would need to see pictures or drawings to see IF you could make a 'backside' tool to help you.
Would need to see pictures or drawings to see IF you could make a 'backside' tool to help you.
What you can try in this case is pulling up the speaker while turning the screws, so that the nut gets some friction against the panel. But this will only work if the nut was put in without any threadlocker.
