Need help with 4 ft cutter blades/bolts

btackett

New member
Jan 18, 2012
62
5
0
Knoxville,Tn
I have an older 4' rotary cutter and finally got the bolts cut off it to replace the main shaft seal. The blades are shot and need replacing. I am having trouble finding the right size blades and bolts. The PO welded the threads on the blade bolts and I had them torched off. The hole in the blade is 45mm(1 21/32") or so, the hole in the stump jumper to mount is 30 mm (1 3/16"). The blades or whats left of the blade is about 17 1/2" long.

Is this a normal size? Most blades I see have a 1 1/2" mounting hole. The bolts use the small notch(keyway).

Also, the blades have BALDAN 213A1-B stamped on them with a fish symbol.

Any ideas?
 

btackett

New member
Jan 18, 2012
62
5
0
Knoxville,Tn
I actually found the bolts at TSC. They had an oddball set that was opened already and it was exactly like mine. Now to find blades for the 4' mower.
 

gktilton

New member

Equipment
79 B7100 w/ FEL, Deere 261 Finish Mwr, Woods M4 Bush Hg, Potato Plow, Cultivator
May 5, 2010
230
2
0
Hooksett, NH
What brand and model is the cutter?
 

btackett

New member
Jan 18, 2012
62
5
0
Knoxville,Tn
That is a million dollar question. I cannot read any of the decals on it due to fading/rough use. I bought a set off feebay for 25.00 shipped to my door. They are 18" long and 1.5" hole.

Should be a direct fit.
 
Last edited: