need some input please...when greasing this part (right side) grease can pass through (see arrows) the other side (left) does not. it seems strange that both side dont react the same.
should the grease seal keep the grease from passing through? if thats the case then the seal must be faulty on the side that does allow the grease to pass through.
by the way iv had the cap off on the left cleaned it out checked the zerk (clear) and seal everything looked fine. put it back together and still cant grease to pass through?
should the grease seal keep the grease from passing through? if thats the case then the seal must be faulty on the side that does allow the grease to pass through.
by the way iv had the cap off on the left cleaned it out checked the zerk (clear) and seal everything looked fine. put it back together and still cant grease to pass through?
