MX Series rear remotes

[TheOldHokie]

100% agree. They look like an afterthought.

Do you happen to know the make and model number of the couplers Kubota uses in those blocks? The blocks are not horribly expensive but the couplers are obscene. My guess is they are 1/2" Faster CPV which retail for $10.

Dan

 

[Matt Ellerbee]

Do you happen to know the make and model number of the couplers Kubota uses in those blocks? The blocks are not horribly expensive but the couplers are obscene. My guess is they are 1/2" Faster CPV which retail for $10.

Dan

I do not. If I think about it, I'll pull the snap ring and try to wiggle one out enough to see the numbers.

 

[TheOldHokie]

I do not. If I think about it, I'll pull the snap ring and try to wiggle one out enough to see the numbers.

Thank you. That would be very kind of you and greatly appreciated.

Dan

 

[hedgerow]

When I bought my MX-6000 last June the dealer threw out $1600.00 dollars when I asked about a couple remotes. No body had any parts back then and I figured I would never use them and almost a year later I haven't missed them. I never had remotes on the Agco that the MX-6000 replaced. I just don't used equipment on the MX that needs remotes.