I have a 2009 2360 with 370 hours and a 60 inch MMM. The mower will lift only an inch or two and stop. TPH runs full travel. Linkage to the mower is not binding. I have run the height adjustment full travel. Any thoughts.
MMM lift issue
- Thread starter T56A15
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Have you "unhooked" all the linkages and see if the under "arms" go all the way up. Look at the arms that lift the MMM and then unhook it, see if they go their full travel, despite not binding to the eye, something might have changed under there and keeping it from going the full travel.
The mower deck is off the tractor. I ran the TPH up and down numerous times and the mower deck lift arms do not go to the full up position. Oil resevoir is full.