DTS62
New member
Equipment
Cat 416, Ford 4630, Woods BB60x, Sitrex SM180, Howse disc, PJT 25' gooseneck
I just recently purchased an L4760. I've had it about a month. I love this tractor, but I quickly found it needed 3 things.
I've dumped 3 mugs of coffee so far by using the over-sized molded in cup holder. One of the mugs I ran over
, so I found a pvc fitting to insert into the factory holder that allows it to now hold a standard size coffee mug, or a bottle of beer. I picked up a 3" sewer clean-out adapter, and with a little customizing on the bench grinder, it works great. I added a little gorilla glue to the bottom of the fitting so it doesn't pull out with the cup.
The fel bucket came without any attachment hooks, so I welded some on.
The third thing I needed to do was replace the tiny plastic tool box with something that will hold chains, pins, wrenches, hammers, etc. I had a metal tool box sitting around the house, so I mounted it behind the seat. I will probably pull it off and paint it Kubota grey, but for now it works.
I've dumped 3 mugs of coffee so far by using the over-sized molded in cup holder. One of the mugs I ran over
, so I found a pvc fitting to insert into the factory holder that allows it to now hold a standard size coffee mug, or a bottle of beer. I picked up a 3" sewer clean-out adapter, and with a little customizing on the bench grinder, it works great. I added a little gorilla glue to the bottom of the fitting so it doesn't pull out with the cup.
The fel bucket came without any attachment hooks, so I welded some on.
The third thing I needed to do was replace the tiny plastic tool box with something that will hold chains, pins, wrenches, hammers, etc. I had a metal tool box sitting around the house, so I mounted it behind the seat. I will probably pull it off and paint it Kubota grey, but for now it works.
