Max Mid PTO RPM - BX2200

[HD071502]

I’m having a shaft made for my snowblower, the builder is asking what RPM.
Any ideas?


Sent from my iPhone using Tapatalk

 

[twomany]

I***8217;m having a shaft made for my snowblower, the builder is asking what RPM.
Any ideas?


Sent from my iPhone using Tapatalk

Engine speed Or about 2600rpm.
http://www.tractordata.com/farm-tractors/003/3/5/3356-kubota-bx2200.html

 

[HD071502]

They are asking for the max PTO speed. I don’t have a tach, not sure if that’s directly related to engine speed or not?


Sent from my iPhone using Tapatalk

 

[HD071502]

Engine speed Or about 2600rpm.
http://www.tractordata.com/farm-tractors/003/3/5/3356-kubota-bx2200.html

Thanks for the link, looks like 2500.


Sent from my iPhone using Tapatalk

 

[twomany]

Yes, The 2600 was included as a "max", Assuming the engine will turn higher than pto rated speed. They all do ;-)

I just built my own PTO shaft while fitting the BX3750 blower (I hope I got that number right ;-)

I used the rectangular solid bar for the big span. It runs smoothly.

ETA

Wooah! That's a 3600rpm rated engine. There is a speed reduction in there somewhere. My bad...

 

[HD071502]

Yes, The 2600 was included as a "max", Assuming the engine will turn higher than pto rated speed. They all do ;-)

I just built my own PTO shaft while fitting the BX3750 blower (I hope I got that number right ;-)

I used the rectangular solid bar for the big span. It runs smoothly.

ETA

Wooah! That's a 3600rpm rated engine. There is a speed reduction in there somewhere. My bad...

My driveshaft builder tried a telescoping square tubing and it vibrates at 2/3 throttle. My mower shaft is splined and much tighter. We’re going that route now. Will report back when I get it.


Sent from my iPhone using Tapatalk