M7-131 Field/Road mode switch

[jlindlsy]

Has anyone seen the tractor stuck in field mode? The switch seems to do nothing. I can go to auto shift mode no problem but it is always in field mode. So the powershift will not even shift through ranges without have to manually switch the ranges even when manually shifting the tractor.




John Lindsly
M7-131 P

 

[Tx Jim]

John
Welcome to OTT
I have no knowledge of a Kubota powershift trans but have some of JD PS trans. I'll guess your tractor has a failed solenoid or sensor. Are any fault codes shown on instrument panel?

 

[jlindlsy]

John
Welcome to OTT
I have no knowledge of a Kubota powershift trans but have some of JD PS trans. I'll guess your tractor has a failed solenoid or sensor. Are any fault codes shown on instrument panel?

I will get one every now and then about clutch slippage but nothing related to the mode.

 

[jlindlsy]

Just to follow up. The problem was just in the switch. I took the switch out and disconnected, cleaned it off and re connected and all is good.

Thank you